Ceramic Rope, Tape, Blanket

Ceramic fiber tape is woven by high quality constructed ceramic fiber yarn. The fabric is suitable for high temperature refractory condition.It can be used for high temperature applications upto 1260 °C.

Ceramic Fiber Cloth is a compression packing for very high temperature duties. It is manufactured from an exceptionally stable fibre material that is soft, non-irritating, non-hazardous & is not limited by World Health Organization or European Union restrictions. These heat resistant fibres are produced using advanced chemical fibre technology. They are spun into a flexible yarn in the UK, together with a low percentage of glass fibre and Inconel wire reinforcement. Ceramic Fiber yarn, Rope, Cloth contains no organic agents or processing additives. It therefore retains its physical and chemical properties at very high temperatures and does not decompose into hazardous substances, as happens with many normal ceramics.

Prime features:

  • Non-hazardous heat resistant fibre construction
  • 1000°C for constant duties, with excursions to 1100°C
  • Competitively priced alternative to normal ceramic fiber packing
  • Far better value for money than other non-hazardous high temperature materials, such as those made of pure silica fibre
  • Good chemical compatibility

Health & Safety considerations :

Average diameter of the mineral fibre used in Ceramic Fiber product Hi-Temp is 9µm which is considered non-hazardous to health. No protection for breathing, eye, hand or body is required by the World Health Organisation or European Union during the product's normal storage, handling and use.

Service capabilities - static and slow rotary duties only

  • Maximum temperature (constant): +1000°C
  • Maximum temperature (intermittent): +1100°C
  • Minimum working temperature: -50°C

Min Quantity

50 Kgs.

Payment Terms

100% Against Performa-Invoice

Certificate

IS 14656 & BS 1902 Cover under

Available profiles

Round, Square & Rectangular

Grade

AAA

Thermal Conductivity

0.12-0.2w/(m.k)

Loss on ignition

<18%

Warp Density

48~60 Piece/10cm

Weft Density

21~30 Piece/10cm

Organic Content (%)

≤15

Delivery Lead Times

Depend upon Quantity

Product should be stored in accordance with the international standards DIN 7716 and ISO 2230.

A brief outline of the recommendations are as follows;

A dry, stable, elevated stores location with good air circulation away from direct sunlight, dust, chemicals and humidity should not exceed 65%.

Expansion Joints, Safety blankets, Curtains, Welding blanket, protective & insulating covers,shields , gaskets, cable or pipe wrapping

Industry:

Foundry work, Aluminium & steel mills, Boiler Insulation , Shipyard, Refineries, Power Plants, Chemical Plants